• <acronym id="l4yv8"></acronym>

    <pre id="l4yv8"></pre>

  • Welcome to our website TEL: 400-0526-177 Mobile phone: 1582 1189653
    Laboratory organic solvent spray dryer
    Model: OM-BLG-2

    Brand: Oumon


    Type: ethanol, acetone, chloroform, toluene, NMP, DMF and other organic solvents dry

    OneProduct description

    N2The nitrogen circulation spray dryer adopts airtight design, which is mainly used in alcohol solution,N2Drying as inert gas makes the equipment run more safely. The product has no oxidation, good quality, good powder consistency and average particle size. Its fluidity can meet the continuous production of the automatic press, and the solvent medium can be recycled online. Solvent evaporation capacity under specified conditions2Kg/h(according to the solid content of the material). The whole set of equipment consists of feeding system, atomizer, electric heater, drying tower, cyclone dust collector, condensing tower, explosion proof device, on-line oxygen detection system and electrical control system.


    TwoData analysis

    OneDrying materials: suitable for a variety of materials, such as chemical, pharmaceutical, new energy industry, etc..

    TwoSolvent type: organic solvent (alcohol, ethanol, acetone and other organic solvents)

    ThreeCirculating gas:N2Nitrogen (avoiding material oxidation)

    FourSolvent evaporation:1-2kg/h

    FiveThe solid content of slurry is: paste size20% (self adjustable)

    SixSlurryPHValue: neutral

    SevenSlurry temperature: normal temperature

    EightInlet air temperature of drying tower:80~90Temperature (adjustable temperature)

    NineOutlet temperature of drying tower:50~60

    TenFinished product: Powder

    ElevenThe residual moisture content of the product is less than that of the product3%(left and right)

    TwelvePower supply:220v50hz 380 /

    ThirteenHeating mode: electric heat exchange is recommended

    FourteenMethods: two. Atomizing liquid feeding type atomizer

    FifteenFeeding mode: Main Tower+Cyclone separator

    SixteenDust removal method: Cyclone

    SeventeenSolvent recovery method: condensing tower recovery


    ThreeEquipment performance parameters

    OneProcessing capacity:2Kg/hLiquid, according to solid content

    TwoElectric heating power:6kw

    ThreePeristaltic pump: adjustable flow

    FourCondensing temperature5-7

    FiveThe oxygen content is less than or equal to3%

    SixSolvent recovery rate:95%

    SevenDryer size: mmOne thousand and five hundred×One thousand and one hundred×Eight hundred and ninety


    FourScope of supply:

    OneSlurry mixing drum Stainless steel making

    TwoPeristaltic pumpOneRegulating flow by bench frequency conversion0.55 kw

    ThreeheaterOneCeramic electric heating tube

    FiveHot air distributionOnesetsus304Stainless steel making

    SixHot air pipelineOnesetsus304Stainless steel making

    SevenDouble feeding liquid atomizing nozzleOneplatformsus316Stainless steel making

    EightDrying towersus316Stainless steel making1.5mmExplosion proof pressure relief device

    NineExhaust ductOnesetsus304Stainless steel making

    Tencyclone separatorOnesetsus304Stainless steel making

    11 Receiving bucketTwoonlysus304Stainless steel making

    TwelveElectric control cabinetOneset


    FourteenSystem pressure charging and discharging systemOneset

    FifteenFeeding valveTwopiece

    SixteenSystem safety valveOneset

    SeventeenObservation mirrorOneset

    FiveDescription of device control point:

    The whole system control point

    OneInlet temperature of hot air

    TwoFeed rate

    ThreeAtomization state

    FourTower pressure

    FiveSystem oxygen content


    Scan QR codeClose

  • <acronym id="l4yv8"></acronym>

    <pre id="l4yv8"></pre>