• <acronym id="l4yv8"></acronym>

    <pre id="l4yv8"></pre>

  • Welcome to our website TEL: 400-0526-177 Mobile phone: 1582 1189653
    Laboratory spray dryer
    Model: OM-1500 / OM-1500A (formerly old models 6000Y and 8000T upgrade)

    Brand: Oumon


    Type: two fluid atomization, suitable for universities, chemical, enterprise laboratories and so on.

    Laboratory spray dryerProduct description:
    It is suitable for the production of micro-particle powder in universities, research institutes and laboratories of food, pharmaceutical and chemical enterprises. It is widely applicable to all solutions such as emulsion and suspension.,It is suitable for drying of heat sensitive substances, such as biological products, biological pesticides, enzyme preparations, etc. Because the material is only sprayed into a fog when the high temperature and instantaneous heating, so these active materials still maintain their active ingredients after drying.
    A wide range of fields: beverages, spices and colors, milk and egg products, plant and vegetable extracts, pharmaceutically synthesized thermosensitive plastics, polymers and resins, aromatics, blood products, ceramics and superconducting biochemical products, dye soaps and detergents, food, adhesives, oxides, bone meal and tooth powder, etc.
    Laboratory spray dryer
    Main features:
    The original self produced sprinkler has high efficiency.
    Large color touch screen operation, automatic control and manual control combined, Chinese and English panel, parameter LCD display.
    Real time regulationPIDConstant temperature control technology, accurate temperature control, accuracy of heating and temperature control.±1℃.
    The spray, drying and collection device is made of transparent, high quality, high temperature and high borosilicate glass.,The whole spray drying process can be visualized.
    Two atomizing structure of fluid spray, high precisionThree hundred and sixteenStainless steel is manufactured, and the diameter of powder injection is normal distribution and good mobility.
    The jets are automatically dredged (through needle) and the frequency is adjustable. When the nozzle is blocked, it will be automatically cleared to ensure the continuity of the experiment.
    The feed quantity can be adjusted by feeding peristaltic pump.
    Special protection function, the fan does not start, the heater can not start.
    Built in imported oil free air compressor with less noise.50db.
    Equipped with air inlet filter to ensure purity of samples.
    After drying, the particle size is uniform.95%The above dry powder is in the same particle size.


    om - 1500

    om - 1500a

    body material

    Cold rolled sheet sprayed

    Three hundred and fourStainless steel(Customizable316l

    Corresponding sample

    Water solubility

    Corrosive solution


    Water evaporation

    Maximum1500 - 2000ml / h(customizable) minimum feed quantity50ml

    Temperature setting range (automatic control)

    Thirty300℃(Inlet temperature)\30140℃(outlet temperature)

    Temperature adjustment accuracy

    Inlet temperature±1℃

    Dry air volume adjustment range


    Spray air pressure adjustment range


    Flow range of feed pump

    5 - 100prm(adjustable speed)



    Inlet temperature and outlet temperature output(420ma)

     Exhaust gas filtration device

     Pulse bag filter (need to be selected)

    Glass parts

    High borosilicate glass, high temperature resistance, no pollution.

    Temperature regulator

    PIDDigital temperature controller

    LCD touch screen

    Fan, heater, liquid delivery pump and needle jet switch

    Temperature sensor

    pt - 100


    4.5KW 220V

    Feeding mode

    Peristaltic pump feed

    Air compressor for spray

    Imported air compressor

    Imported air compressor


    Circuitous fan brushlessDCmotor

    Air inlet treatment

    Filter (matching)


    Standard configurationOneCustomizable07/1.0/1.5/2.0/2.2etc.

    Air connection for spray

    external diameter7mm

    Air pressure for spray

    Bass tube0.3Mpa

    Exhaust connection caliber


    Safety protection function

    The temperature of the inlet and outlet is too high and the fan starts automatically.FiftyProtect the heater from damage.


    Shape size

    x650 550 (w) (d) x1250 (h) mm

    Net weight


    Power Supply


    Factory standard configuration

    One main engine, one exhaust pipe, atomization chamber, cyclone separator, material collection bottle, waste collection bottle, a large clamp, medium clamp,TwoOne small clamp, one manual, fuse.TwoOne, warranty card, a silicone liquid delivery tube.OneRoot and spray air pipe.


    Basic device

    Routine laboratory type

    Upgraded version of stainless steel

    Custom money


    OneNebulizer;TwoLarge clamp;ThreeExhaust pipe;FourLock nut;FiveCyclone separator;Six、OneNumber card hoop;

    Seven、Collecting bottles;EightLarge clamp;NinePeristaltic pump;TenDrying room;ElevenTouch screen;Twelve、TwoNumber card hoop;ThirteenPower switch;

    FourteenFeed pipe;Fifteen、ThreeNumber card hoop;SixteenCollection tube

    Scan QR codeClose

  • <acronym id="l4yv8"></acronym>

    <pre id="l4yv8"></pre>